The selection of a cable requires comprehensive consideration of various factors. For example, compare the specification, purpose, preference for specific colors, feeling in the hand, etc. of the cable. It is precisely because of this complexity that many aspects must be considered in order to select a truly suitable cable. The tensile strength of cable is one of the most commonly used characteristics in the selection of cable products. In general, the strength of the cable should match the requirements of the application. The ship design MBL is the core parameter according to which all other components of the ship mooring system are dimensioned and have specified tolerances. The line design breaking force (ldbf) is the minimum breaking force of a new, dry, buckled mooring line during testing. This applies to all mooring lines and tail materials. When selecting the cable, the cable ldbf shall be 100%-105% of the ship design mbl100. The working load limit (WLL) is the maximum load that the mooring line should bear during operation, which is calculated according to the standard environmental conditions. All cables shall be tested for strength. This helps customers choose the appropriate cable size and strength in the required application environment, and ensures maximum safety and service life. The specific gravity requirement refers to the density of the cable relative to water. The cable material can be selected according to the actual demand. (for example: chnmax UHMWPE rope floating, chnflex nylon rope sinking, chnline polypropylene rope floating, and chnmix rope can be customized according to requirements)