Working Pressure：0.2 ~ 0.4MPa
Height of Eyewash Nozzle：1000mm
Eye Washing Flow Rate：11.4L/Min
Inlet Size：RC 1-1/2 Internal Thread Height to 60 mm
Drain Size：RC 1-1/4 Internal Thread Height to 40 mm
·Medium: normal temperature domestic water according to sanitary standards.
·Main material: meet the national standards of special SS304 stainless steel pickling passivation treatment, than without pickling passivation of SS304 stainless steel acid alkali salt oil chemical material corrosion resistance stronger castings are all made of silicon sol process of casting, there will be no blister or bad defects like pores, relative to the density of sand mold casting process and strength higher service life is longer.
·This product is suitable for use in the environment with temperature higher than 0ºC. Please pay attention to the anti-freeze insulation of pipes when using in the environment of 0ºC or below.
·Eye wash switch mode: foot pedal just site when using, clean water from washing eye automatic sprinkler, sprinkler peripherals dust cover, when used with flow automatically made pedal away after use, water shut-off switch off the water at the same time, the system automatically converted into empty state, system automatic emptying in 5 seconds eye bath pipe such as internal water, anti-freezing effect.
·Eyewash nozzle: the eyewash nozzle is equipped with multi-layer filter screen, which can effectively filter impurities in the water and make the water flow form foam column, effectively preventing impurities in the water or secondary injuries to the injured eye nerves and injured parts due to extreme water flow. Easy to remove, clean and maintain.