Home>Products>Eye Wash Station
Safety Eye Wsah Staion
  • Safety Eye Wsah Staion
  • Safety Eye Wsah Staion
  • Safety Eye Wsah Staion

Safety Eye Wsah Staion

Nominal Pressure:1.0MPa

Working Pressure:0.2 ~ 0.4MPa

Height of Eyewash Nozzle:1060mm

Height of Shower Rod:1700mm

Height of Sprinkler Head:2086mm

Eye Washing Flow Rate:>=11.4L/Min

Impact Flow Rate:>=75.7L/Min

Inlet Size:RC 1-1/4 Internal Thread

Drain Size:RC 1-1/4 Internal Thread

The power supply:220V/AC/1PH/50HZ

Explosion-proof grade:Exd IICT6

Protection grade:IP65

The total power:200W

Electrical tracing power:25W/M

Weight:66 Kg

Package Size:L*W*H=2550*850*380mm

Product Size:L*W*H=500*900*2450mm


Share
PRODUCT DESCRIPTION

·Main material: special SS304 stainless steel in line with national standards.After pickling and passivation, SS304 stainless steel has stronger corrosion resistance to acid, alkali, salt and oil chemicals than that without pickling and passivation.All castings are cast by silica sol process, and there are no defects like sand holes or pores. Compared with sand casting process, the density and strength are higher and the service life is longer.

·Features: all the pipes of eye washer adopt PLC seamless ring welder automatic butt welding technology, which can avoid defects such as missing welding and false welding. Automatic ring welding features deep melt welding degree and high strength.After welding and then through pickling passivation treatment, acid, alkali, salt, oil chemical substances corrosion resistance is stronger.After completion, high-pressure water jet equipment is used to thoroughly clean the inside of the pipeline, so as to ensure that the inside of the eye-washer pipeline is clean and clean.

·The outer wall of the pipe is wrapped around the outer wall of the eye washer by the heat-conducting aluminum mooring layer, effectively ensuring the uniform conduction of heat from the electrical wake to all the pipe surfaces of the eye washer.Heat preservation of heat-conducting aluminum mooring layer is carried out by adopting class A flame-retardant rubber and plastic insulation materials with A thickness of 30MM, which can minimize the heat loss of electrical tracing tropics and effectively ensure the constant temperature of the eyewash pipeline

State.

·Low-temperature self-limiting temperature and explosion-proof electric heating belt is adopted in electric heating belt, the maximum surface temperature of electric heating belt is 65 degrees, and the maximum temperature of the eyewash pipe is no more than 38 degrees after subtracting heat loss, which can effectively ensure that the injured eye nerve will not be scalded by excessive water temperature inside the eyewash pipe caused by continuous heating of electric heating.

·The temperature control system adopts thermal resistance temperature controller, and the factory set temperature is 20 degrees. When the temperature of the eyewash pipe is higher than 20 degrees, the electric tracing belt will automatically cut off and stop heating.Double temperature control system is formed with self-limiting temperature electric tracing belt to ensure the safety of equipment.

·Leakage protection system: schneider leakage protection system, when the equipment circuit system leakage or short circuit phenomenon system automatically power off, more safe and reliable.It can effectively prevent the unpredictable serious consequences caused by product leakage.

·Explosion-proof power distribution box can be set with power indicator and work indicator to observe whether the equipment is in normal working state in real time.

·Shell adopts high quality new non-toxic ASA modified plastics, treated with modified acid and alkali resistance and weather resistance technology, it is not easy to fade, not easy ageing, long service life and superior weatherability and in low temperature environment or use does not affect its service life on the ship, the minimum can be 45 degrees below zero cold resistant, 45 degrees below zero environment does not affect its performance.It is resistant to corrosion of strong acid, alkali, salt, oil and other chemical substances.It is suitable for outdoor use and some harsh conditions.

·The insulation shell is removable for easy maintenance.The connection of the shell is made of galvanized steel plate. The connection nut is embedded in the shell with copper nut to enhance the connection strength. The connection bolt is made of 304 stainless steel.Shell adopts high quality new non-toxic plastic, ASA treated with modified acid and alkali resistance and weather resistance technology, it is not easy to fade, not easy ageing, long service life and superior weatherability and in low temperature environment or use does not affect its service life on the ship, the minimum can be 45 degrees below zero cold resistant, 45 degrees below zero environment does not affect its performance.Can effectively prevent ultraviolet irradiation and lead to product aging, fading and other defects.It is resistant to corrosion of strong acid, alkali, salt, oil and other chemical substances.It is suitable for outdoor use and some harsh conditions.

详情图.jpg