Home>News

Points To Note for Security Padlock Applications

Mar. 01, 2020

Safety padlocks are widely used in industrial production. The key is that they are used in more areas. So do you know what method will be used during installation? Safety padlocks supplier to share with you.

1. Generally, safety padlocks have mounting holes. There are few safety padlocks without mounting holes. For safety padlocks without mounting holes, the safety padlock must be welded and installed immediately. This installation method is recommended to give full consideration to the clear application. If the welded goods and components are fixed and passed away, it will be more troublesome to modify them.

2. There are two kinds of normal security padlocks. This type is with a keyhole, so the machine is very simple and convenient. Perhaps, depending on the details, sometimes the prescribed holes are different, so this is no keyhole. This designer has different choices according to different customer regulations; then he must accept different machines with an open mind. Equipment method, metaphor does not have to punch machines and equipment.

3. If it is temporarily fixed and the expected effect is fixed, butt welding can be selected, and the welding is performed in several important positions. When disassembling and assembly, the welding must be smoothed by an electric grinder. It may be required that the raw materials of the goods and components are closely combined with the welding requirements.

4. For safety padlocks with mounting holes, you must install them immediately with small screws. If there is a good one, it must be removed more conveniently and quickly.

High Safety Padlocks

High Safety Padlocks

High safety padlocks are often used, so people should pay more attention to the usual cleaning; what I am talking about is not only scrubbing the outside of the lock into a new one, this is all impossible; but he is not the most The key is that the most important part of people's cleanup is the lock cylinder. People must ensure that the lock cylinder does not enter everything, otherwise there is no way to open the lock. This not only fails, but also makes our locks inconvenient. Changes, the anti-theft lock core will have an air oxide layer; therefore, people want to delay, under such things, it is necessary to introduce grease, graphite powder or signature pen powder into the anti-theft lock core on time.

What are the factors that affect the quality of long padlocks?

Only professional can make the safety padlock have a good effect, so it must be professional in all fields. So, what kind of professionalism must this product have in the production and processing process? In the production and processing of this commodity, there must be a corresponding plan design. If the scheme design has no relative specificity, it will not have good safety performance when used, and will lose its quality because the appearance does not exceed enough warnings. Therefore, relatively speaking, the professionalism of scheme design is very important. The second is the production process of safety padlocks, because this kind of hardware locks require more than ordinary hardware locks, and its internal parts require higher accuracy, which must be improved in the production process.


Share: