Home>News

What Processes Can Make The Quality Of Security Padlocks Better?

Feb. 03, 2020

Only technology can make ABS safety padlocks have very good quality, and it is all aspects of technology, then what kind of products must be used in manufacturing.

Safety padlocks supplier for you to share: What about technology on the one hand? The first is that the technology on the design scheme must have a relative design scheme in the production of this type of product. If there is no relative technology on the design scheme, one of them will be used in the application. There is no very good safety factor in the world, and it will also make it lose its quality in the application because the appearance does not exceed sufficient warning. So relatively speaking, the technology above the design scheme is very critical.

Secondly, that is to say, the technology of safety short padlocks. Because this type of lock has higher requirements than ordinary locks, its internal parts also have higher precision requirements. This also requires manufacturers to have The process technology is improved. Naturally, if a manufacturer wants to improve its own process technology, it must gradually improve the technology of all the elite teams. Naturally, when customers choose such products, they must also see which manufacturers are reliable. When a manufacturer does not have reliability, usually it will bring its own lack of team culture.

In fact, as far as the technology of the product is concerned, it usually also suffers from many levels of harm from the manufacturer. For example, some manufacturers have a longer work experience in manufacturing, and can also use their own work experience to make technology better Enhancement. If a manufacturer has a better product advantage in manufacturing, they can have better product research and development capabilities. Such technological improvement is very critical. Therefore, when customers choose a manufacturer, one is to see which manufacturers are reliable and large-scale. Second, it is also necessary to look at the work experience of the manufacturer. Only then can it be used in applications. It will be very satisfying.

Abs Safety Padlocks

ABS Safety Padlocks

Metal surface treatment inspection method of hardware buckle lock

The use of safety hasp locks is widespread, and the characteristics of the products have a great correlation between them. The safety hasp lock product design is effective. The overall design scheme tends to the customer's requirements, and meets the customer's needs for the actual operation and safety aspects of the product. It is required that the actual operation of the safety buckle products is relatively simple and easy to understand. The characteristics of safety hasp lock products are also relatively high-quality, with excellent dielectric strength. Rubber materials are used as their raw materials. These materials have very good dielectric strength. They are fused with safety hasp products to secure safety. The characteristics of the buckle are more complete, develop the application scope of the product and improve the characteristics of the product.

Stainless steel safety hasp lock products have strong characteristics, and the product has a long service life. Before the original factory, they must undergo a unique solution. The plating process, Luo plating, and other methods, improve the characteristics of stainless steel safety hasp lock products, improve The quality of the product. After the solution, the safety buckle products have better corrosion resistance and oxidation resistance, so that the acceptability level of the product has a qualitative overflight and can be applied to a certain level of extreme natural environment. The structure of the product is not so complicated, and the volume tends to be practical, which is conducive to the application and enforceability of the customer. It is a highly applicable security padlock product.

Metal surface treatment inspection of safety buckle lock:

The safety buckle lock is selected from the national standard cold-rolled steel plate, which has been solved by hanging chrome plating. The appearance is smooth and smooth. The embedded elastic yellow is selected from Japan's technology. It can accurately locate unsteady under vibration, convenient to use in the housing or mechanical equipment, and convenient to install.

1. Start with the metal surface treatment of the commodity:

Goods made with a good safety buckle lock have a smooth surface, and the plating process is very smooth. The products made with poor boards are uneven, even if the electroplating process is multilayered, because the electroplating process is not easy to make up for the shortcomings of the surface layer of the product. Some can also make bubbles or turn yellow. This is all the main manifestation of the debris.

2. Start with a thin product material:

Usually you see good commodity raw materials that are thick and used for a long time, and poor products that are thin and cost-effective, and it won't take long to be damaged. In the same way, the buckle is the same. Good raw materials are thick, the support is strong, the application frequency is more, and the life is long. Poor commodity raw materials have a weak support, so they will be deformed very easily, and they will be used less frequently and shorter.


Share: